Adelaide Chandelier
Finish:
Matte Black
MSRP:
$1,198.99
Chandeliers
SKU - ADL5030MBK
Matte black and crystal make a beautiful, unexpected pairing. The Adelaide series, available as a semi-flush mount, pendant, or chandelier, is a study in contrast with a hint of French country style. Whether above a dining table or perched in a powder room, Adelaide illuminates curiosity and charisma.
-
DimensionsDimensionsThe measurement (in inches) of the fixture's length, height and depth. W x H x D30.00" W x 36.00" H x 30.00" D
-
Light SourceLight SourceThe type of bulb from which the fixture produces light.Both
- * Product specification may vary based on the chosen finish and size.
-
Overall HeightOverall HeightThe total height of the fixture including maximum length of rods/chain supplied.136"
-
Canopy DimensionsCanopy DimensionsThe measurement (in inches) of the canopy, the part of the fixture that mounts to the ceiling to cover the electrical components.5.00"W x 0.75"D
-
Chain/Downrod LengthChain/Downrod LengthThe length (in inches) of chain or rod supplied. Rods in varying lengths may be combined to achieve the desired finished height.8'
-
MaterialMaterialThe primary material used to construct the fixture.STEEL
-
Bulb IncludedBulb IncludedWhether or not bulbs are included with this fixture.No
-
Bulb QuantityBulb QuantityThe total number of bulbs this fixture uses.9
-
Bulb TypeBulb TypeCommon Light Bulb Base Types. LED Light Bulbs. CFL Bulbs. Fluorescent Light Bulbs. Halogen Light Bulb.Candelabra Base
-
Watts per BulbWatts per BulbThe average number of watts per bulb put out by this fixture.60
-
DimmableDimmableWhether or not this fixture's light level can be dimmed.Yes
-
VoltageVoltageThe measurement (in volts) of the pressure of electricity going through a wire.120v
-
Wire LengthWire LengthThe length of wire provided with the fixture.12'
-
Location RatingLocation RatingThe type of environment in which the fixture can be located.Damp
-
Install PositionInstall PositionThe position of the fixture's light when installed on a vertical surface. "Up/Down" indicates that the fixture (vanity light or wall sconce) can be mounted so that the light points upward or downward. "Horizontal/Vertical" indicates that the fixture (bath bar) can be mounted horizontally or vertically, with the light pointing outward.N/A
-
Sloped Ceiling CompatibleSloped Ceiling CompatibleWhether the fixture can be installed on a sloped ceiling and hang properly.Yes
-
StyleStyleThe general design style of the fixture.Traditional
-
CollectionCollectionThe group to which this fixture belongs. Coordinating fixtures will have the same Collection name.Adelaide
- * Hover over fields for additional information